Xiaomi Mijia Tool Kit with Electric Screwdriver, 22 Bits and Hand Tool Set - MJGJX001QW

The Xiaomi Mijia Tool Kit puts a 2000mAh electric screwdriver, 22 S2 steel bits and six hand tools in one clamshell case, ready for flat-pack furniture and household repairs.

Most household jobs stall for the same reason: the right tool is in a drawer somewhere, or it does not exist in the house at all. This kit answers that by putting the full set in a single clamshell case with a fixed slot for every piece, so you can see at a glance that nothing is missing and carry the whole thing to the job in one hand.

The centrepiece is the electric straight screwdriver. It drives 4N·m under power, which handles the long repetitive screws in a wardrobe or a bed frame without wearing out your wrist. When a screw needs to go properly tight at the end, you switch to manual mode and the all-metal planetary gearbox lets you apply up to 8N·m by hand, so the tool finishes the job instead of handing it to a second screwdriver. Three torque settings, forward and reverse, and a built-in LED light for working inside a cabinet complete it.

Bits are the part people run out of first, so there are 22 of them in S2 steel: 18 short bits at 25mm and 4 long bits at 50mm, held in a magnetic C6.3 snap-in socket. A universal flexible shaft and a 60mm magnetic extension rod cover the screws you cannot reach straight on, which in practice is most of the ones behind a panel or deep inside a frame.

The hand tools are full-size rather than token miniatures: a forged steel claw hammer with a shock-absorbing rubber grip, a chrome-plated adjustable wrench rated to 230N·m, spring-loaded needle-nose pliers that strip, crimp and cut wire, a 3m self-locking tape measure with a bubble level, 8 allen keys with ball ends, and a utility knife with carbide-treated blades.

Xiaomi Mijia Tool Kit Key Features:

• Electric screwdriver, 4N·m powered and 8N·m manual — the motor takes the repetitive turning, and the all-metal planetary gearbox lets you finish a screw tight by hand at double the torque.
• 2000mAh battery, about 600 screws per charge — enough for a full assembly job in one sitting, recharged through Type-C in roughly 180 minutes.
• Three torque settings with forward and reverse — match the setting to the screw so you drive it home without stripping the head, and reverse it out just as easily.
• Built-in LED light — lights the screw head when you are working under a desk, inside a cabinet or behind a machine.
• 22 S2 steel bits — 18 short bits at 25mm and 4 long bits at 50mm in a magnetic C6.3 snap-in holder, covering the head types you actually meet in furniture and electronics.
• Universal flexible shaft and 60mm magnetic extension rod — reach screws at an angle, behind panels and at the bottom of deep holes where the screwdriver body will not fit.
• Forged steel claw hammer — shock-absorbing anti-slip rubber grip, a V-shaped claw for pulling nails, and a rubber hammer cover so you can tap a finished surface without marking it.
• Adjustable wrench rated to 230N·m — chrome-plated high-strength steel with a 25mm jaw, so one wrench covers the nut sizes on furniture, bicycles and plumbing fittings.
• Multi-purpose needle-nose pliers — wire stripping, gripping and crimping slots with a cutting edge, rubber-coated handles and a loaded spring that reopens them for you.
• 3m self-locking tape measure with bubble level — a nylon-coated blade that resists wear, a movable hook that keeps inside and outside measurements accurate, and an auto-lock you release with one press.
• 8 allen keys with 25° ball ends — 1.5, 2, 2.5, 3, 4, 5, 6 and 8mm in high-strength steel, and the ball end lets you turn a bolt from an angle when a straight approach is blocked.
• Utility knife with carbide-treated blades — an 8-segment snap blade, push-and-twist auto lock, a string-cutting groove and a tail cap for changing segments safely.
• Clamshell case with hang hook — fixed slots and flexible clasps hold each tool in place, with a 185 × 43 × 29mm compartment for the screws and nails that come with flat-pack furniture.

Technical Specifications: